Saturday, November 23, 2024
nanotrun.com
HomeMaterialsTelluride PowderHigh Purity Germanium Telluride GeTe Powder CAS 12025-39-7,99.99%

High Purity Germanium Telluride GeTe Powder CAS 12025-39-7,99.99%

Germanium Telluride’s chemical formula is GeTe with a molecularweight of 200.24. It is important as a semiconductor material of the group II-VI.
Purity: 99.99%

Particle Size: -100 Mesh


About


Germanium Telluride GeTe Powder


:


Germanium Telluride (GeTe), which is a combination of germanium-tellurium is an ingredient of chalcogenide glas. It is semimetallic in conductivity, and has ferroelectric characteristics. Three main types are germanium telluride crystals. They are a(rhomboid and g (orthogonal) at ambient temperature and b[cubic, halite] at high temperatures. The main phase in pure GeTe at the ferroelectric Curie temperature is 670 K. Low-temperature superconductor, doped germanium Telluride.

Germanium telluride crystals are a semiconductor of the periodic table WTH group element. Ionic crystals.Trigonometric system face center structure, b. 19G1 lining.Melting point 724 C’.It is a direct bandgap semiconductor with a room temperature forbidden bandwidth of 0.23eV.|19G1 liner. Melting point 724 C’. It is a semiconductor of direct bandgap with an infrared forbidden bandwidth (room temperature) of 0.23eV.|19G1 liner.Melting Point 724 C’.It has a 0.23eV room temperature bandwidth.} It is a narrow bandgap semiconductor with a hole mobility of 7×10-3mZilv “S) degree prepared by melting and recombination method.|This is a semiconductor of narrow bandgap with hole mobility of 7×10-3mZilv. It was prepared using melting and recombination.|The narrow bandgap semiconductor has a hole mobility 7×10-3mZilv. This was obtained by melting and then recombination.} This material is useful for detection and infrared emission. Globally trusted Footprintbooks

Germanium Telluride GeTe Powder

supplier. You can send us an inquiry to learn more about our latest products.

Prices starting at


Germanium Telluride

Anytime.


Germanium Telluride Powder Product Performance :

Germanium Telluride has the chemical composition GeTe. It is very stable in air.


Technical Parameter of Germanium Telluride geTe powder :

Product Name MF Purity Particle Size Molecular Weight Density The color of the sky
Germanium Telluride GeTe 99.99% -100 Mesh 200.24 6.14 g/cm3 Gray Black


It is simple.


Germanium Telluride GeTe Powder


Produced?


Here are the steps to prepare germanium-telluride:

1) Add some germanium telluride to the organic solution and stir it. This is the ratio of the germanium telluride dust to the volume fraction in the organic solvent. It’s (2100)/(5100). The mass fraction unit is Mg, and volume fraction unit is mL.

(2) Place the mixture in Step 1 into the cell crusher.

(3) After the ultrasonic telluride dispersion, it was centrifuged and the grayish black supernatant was obtained. Supernatant was used to disperse the two-dimensional material germanium Telluride.


Applicaciones


Germanium Telluride GeTe Powder


:


Germanium Telluride is a thermoelectric substance.

For thermoelectric refrigeration, germanium telluride can be used.

Germanium telluride can also be used to make semiconductors and infrared detection devices.

GeTe may soon replace flash random access memory or dynamic data storage. In 1987, Yamada et al. In 1987, Yamada and colleagues. They are better choices than Te81Ge15Sb2S2, whose transition time is longer, has lower circularity, and offers a higher optical contrast.

High resistivity between amorphous crystalline and crystalline states makes it a suitable candidate for RF switching. A thin layer of GeTe must be applied to the substrate for radiofrequency. Membrane performance can be affected by many factors, including the composition of the precursor layer, seed layer structure, pressure, gas flow rate and precursor bubbling temperatures, as well as substrate.


Germanium Telluride GeTe Pulver Storage Conditions


GeTe powder’s dispersion and usage performance will be affected by the damp reunion. GeTe GeTe should therefore be vacuum packed and kept in cool dry rooms. GeTe powder shouldn’t be exposed to stress.


Packing and Shipping Germanium Telluride geTe Powder :


There are many options for packaging, which all depend on the amount of germanium Telluride GeTe.

Germanium-tetrae GeTe powder packaging


You can vacuum pack 100g, 500g, 1kg/bag or 25kg/barrel. Or as you request.

Germanium Telluride GeTe Powder Shipping


Could be sent out by air or by sea.

Germanium Telluride Properties


Other Titles
germanium monotelluride, germanium(II) telluride,

germanium(2+), telluride, and GeTe powder

12025-39-7

Compound Formula
GeTe

Molecular Weight
200.23

Appearance
Gray Black Powder

Melting Point
725


Boiling Point
N/A

Density
6.14 g/cm3

Solubility of H2O
N/A

ExactMass
203.827 g/mol


Germanium Telluride Safety & Health Information


Signal word
N/A

Hazard Statements
H302

Hazard Codes
Xn

Risk Codes
R22

Safety statements
N/A

Transport Information
NONH on all transport modes




    RELATED ARTICLES
    - Advertisment -spot_img

    Most Popular

    Recent Comments