Appearance. White powder
N.W. : 25 kg/bag
Utilization of redispersible polymer powder
Improve flow properties
Increased strength in flexural areas
Reducing material water absorption
Concrete accelerator product introduction
Dispersible powder of polymer( RDP powder, VAE Powder)
A white powdery, powdery polymer that is commonly used for the modification of mortars made from cement or gypsum.
Vinyl acetate ethylene redispersible powder
It can be rapidly redispersed with water to make an emulsion. The cement mortar is modified by the formation of a film. It is extremely flexible and can withstand weather, abrasion, and a wide range of substrates.
Redispersible Polymer Powder Uses:
Redispersible Polymer Powder can improve performance in construction
The Redispersible powder can increase flow performance and improve thixotropy. It can also reduce sag resistance.
Redispersible powder can improve cohesion and open time, as well as enhance water retention.
Effect of VAE Redispersible Polymer Powdercan after mortar is cured
Enhance tensile and bending strengths; decrease elastic modulus; enhance deformability; material compaction; increase wear resistance, improve cohesive strength; lower carbonization depth; lessen material water absorption; create materials with extreme water-increasing properties (by adding water-increasing Rubber powder).
Parameters Redispersible powder VAE Powder
Articles |
Parameters |
Appearance | Wet powder |
Solid content (wt%) | >=98.0 |
Ash(wt%) | 10+-2% |
Bulk density(g/L) | 300-500 |
Particle size | 325 mesh |
pH | 6-8 |
The minimum temperature for film formation | 0~5 |
Packaging and storage Redispersible powder
Redispersible polyester powder should always be stored at room temperature. Six months is the recommended time for use.
Please remember to use edispersible dust early in the season.
and should be stored in warm, humid areas to increase their chances of formation.
Use r Edispersible powder immediately after opening the bag.
25kg/bag, Paper-plastic square bottom valve bag.
Customers can request packaging customization.