A white stearic acid amide oil emulsion. The product is environmentally friendly, safe, clean, and non-polluting. It can be used in paints, inks, and leather coatings.
Particle Size: D50: =2um
Stearic Acid Amide Emulsion:
Stearic acidamide amide, a white emulsion is safe and healthy. The product can be easily dispersed in water, has low viscosity and is highly dispersible.
Stearamide may also be known as stearamide. Its chemical composition is C17H35CONH2. Stearic acidamide amide is insoluble when mixed with water. It can be slightly soluble at room temperature in organic solvents. It is able to improve dispersion effects and the affinity of dyes.
Excellent adhesion and lubricity. No moisture absorption. You can mix it with paraffin wax. Ammonium salt is created by the reaction between stearic and ammonia. It then gets dehydrated to get the final product. It is a good, smooth product that has low hygroscopicity. Use it as a pigment ink mixed agent, surface-active and fiber oil agent.
The use of stearamide in thermal paper coatings can serve as both a sensor and slip agent, and as an anti-blocking and slip agent for polyolefin films. The base of stearates is fatty saturated linear monocarboxylic oils derived from natural vegetable oil. Send an inquiry for the most current price to purchase bulk Stearic Acid Amide Emulsion.
The properties of Stearic Acid Amide Emulsion
A white stearic acid amide oil emulsion. The product is environmentally friendly, safe, clean, and not polluting. It can be easily dispersed in water.
Technical Information of Stearic Acid Amide Emulsion:
| Solid content | 25+-2 | ||
| Viscosity,cps |
|
||
| Particle Size D50 | <=2um | ||
| PH | 6-9 |
How does Stearic Acid Amide Emulsion get made?
Insoluble in water, stearic Acid amide must be prepared using emulsifiers. The water-based stearic Acid amide Emulsion is still not able to disperse well even after adding an emulsifier or dispersant. Additionally, it can easily precipitate. Long-term storage may also cause flocculation and stratification. Additionally, high-speed stirring is required and grinds under heat to make the aqueous solution of stearic acids amide. The production cost for this product is very high.
First, add the water-based water-basedstearic Acid amide to water. Next stir for 60 min at 2500r/min. Then add defoamer (stirring frequency is 2500r/min). Finally add preservative to stir for another 40 minutes. This will produce an aqueous solution of stearic Acid amide. This prepared water-based, stearic-acid amide-amide emulsion contains 41.7% solids. It has a viscosity level of 146 mPa*S. After 30 minutes of centrifugation at 20000r/min, the mixture was stirred for 40 min. Finally, add defoamer and preservative and continue stirring for another 20 minutes.
Stearic Acid Amide Emulsion:
Stearamide can be used to lubricate and release molds for polyvinylchloride, polystyrene, and other plastics.
Stearamide is often used with oleamide-erucamide as an antiblocking agent to polyolefin film films.
Stearamide, unlike the common inorganic anti-blocking agents (silica), does not affect the product’s transparency. Stearamide is used to release synthetic rubber, natural rubber, and as a lubricant for rubber compound processing. This gives it a high Gloss.
The sensitizer of thermal paper is made from stearic Acid amide Ultrafine Aqueous Dispersion.
The ultra-fine, water-based, stearic Acid amide dispersion serves as textile waterproofing, fibre softener, antistatic and wetting agents, as well a fixing aid.
Shipping and Packing of Stearic Acid Amide Emulsion
You can choose from many kinds of packing depending on your stearic Acid amide Emulsion Quantity.
Packaging of Stearic Acid amide Emulsion:
25kg/barrel
Emulsion shipment of Stearic Acidamideamide
Could be sent by sea, air, or express, as soon after receipt of payment.
