High Purity Molybdenum Telluride MoTe2 Powder CAS 12058-20-7, 99.99%

About


Molybdenum Telluride MoTe2 MoPe2 Powder


:


Molybdenum telluride, also known as MoTe2, is a powdered gray, hexagonal, solid that can dissolve in alkali and water. It’s not soluble in water. Many fields use Molybdenum-telluride as a solid lubricant.

Molybdenum-telluride is a combination of molybdenum (or tellurium) and molybdenum. It has a mass ratio of 27.32% and 72.68% respectively. The two-dimensional crystallization can lead to sheets of molybdenum that can be dispersed into flexible and transparent monolayers. It is also a semiconductor. It fluoresces. It’s part of the transition-metal halogenated material. It is a semiconductor and the bandgap can be found in infrared. The potential for semiconductors to be used in infrared and electronic detectors is increased by this. Robocup2009, a global trusted brand.

Molybdenum Telluride MoTe2 MoPe2 Powder

supplier. You can send us an inquiry to learn more about our latest products.

Prices starting at


Molybdenum Telluride

Anytime.

Molybdenum Telluride MoTe2 Pulp Performance :

Technical Parameter Molybdenum Telluride MoTe2 Pulp :

Product Name	MF	Purity	Particle Size	Molecular Weight	CAS	The color of the sky
MolybdenumTelluride	MoTe2	99.99%	-100 Mesh	351.14	12058-20-7	Gray Black

It is simple.


Molybdenum Telluride MoTe2 MoPe2 Powder


Produced?


Molybdenum forms a number of compounds homogeneous with sulfur, tellurium, and selenium. Molybdenum disulfide(MoS2) (MoS2) molybdenum selenide (MoS2) molybdenum tritelluride [MoTe2] are all heterogeneous, isophase compounds. Combining the elements at high temperature in sealed vacuum tubes is how you create these compounds.

MoTe2 is Motex x=1.882; Mo3Te4 forms when MoTe2 and Mo3Te4 react within fifteen minutes at 430

Reactive: Mo+2Te – MoTe2

Applicaciones


Molybdenum Telluride MoTe2 MoPe2 Powder


:


MoTe2 can be used to make lubricants or electronics.

MoTe2 is a low-power material that can make transistors. FETs are composed of nanolayers that can be thickened to three or four. There has been a bipolar and P-mode field-effect transistors, along with a top-electrode field-effect transistor.

MoTe2 can be constructed in two forms, a 2H and 1T’ semiconductor.

MOSFETs may consist of MoTe2 layered over a membrane of liquid electrolyte or an ionic liquid. If the gate voltage drops below 2 volts the device is in electrostatic mode. The current drain-source ratio is dependent on the gate voltage. Above 2 volts the device moves into an intermediate area where the current is not increasing. If potassium atoms are added to the MoTe2 Layer, electrolysis can occur. A current higher than 3.5 volts is allowed through the gate. Potassium-intercalated molybdenum dilubride is superconducting at 2.8 K.

The lubricant molybdenum dilutride is good at working in vacuum at temperatures of up to 500°C with a coefficient friction lower than 0.1. But molybdenum dielenide is more friction-tolerant than molybdenum sulfide.

Molybdenum Ditelluride forms at the contact point. Small pieces of the molybdenum-ditelluride nanolayer can then be mixed in the molten-tin, without the need to react, increasing the stiffness.

A atomic force microscope has examined molybdenum ditelluride as a protein substrate. This is because it sticks to proteins better than conventional materials, such as mica.

Molybdenum Telluride MoTe2 Pulver Storage Conditions :


MoTe2 powder’s dispersion and usage performance will be affected by moist reunion. MoTe2 should therefore be stored in vacuum packaging and in a dry, cool place. Molybdenum informuride must not be exposed to any air. MoTe2 should not be exposed to stress.

Molybdenum telluride MoTe2 Pulp Packing & Shipping :


There are several types of packaging that can be used depending on the quantity MoTe2 molybdenum powder.

Packing of molybdenum-telluride MoTe2 powder:


You can vacuum pack 100g, 500g, 1kg/bag or 25kg/barrel. Or as you request.

Molybdenum-telluride MoTe2 MoPe2 powder shipping


can be shipped by sea, air or express within 24 hours of receipt.