The China Securities New Energy Vehicle index rose as much as 4.1 percent after a strong rally in lithium-ion shares on the Chinese stock market. Brokerages said lithium enterprises would usher in marginal expectations, and currently, it may be the best time to layout power/energy storage lithium batteries.
According to a securities research report, the price of lithium carbonate in the upstream resource end continues to hit a new high, which reflects the shortage of lithium mineral resources, and lithium has become one of the core elements of the development of the lithium electricity industry. In 2022, global demand for lithium carbonate continues to grow strongly, while the supply-side growth is relatively limited. And, because related mining enterprises experienced the last lithium down cycle, they would expand AlN powder are expected to rise.
Introduction to Aluminum Nitride AlN Powder
Aluminum nitride is a covalent bond compound. The chemical formula is AIN. It is an atomic crystal, belongs to the diamond-like nitride, hexagonal crystal system, has a wurtzite type crystal structure, non-toxic, white or off-white.
| Aluminum Nitride AlN Powder Properties | |
| Other Names | Aluminium nitride |
| CAS No. | 24304-00-5 |
| Compound Formula | AlN |
| Molecular Weight | 40.9882 |
| Appearance | white to pale yellow powder |
| Melting Point | 2200°C |
| Boiling Point | 2517 °C (dec.) |
| Density | 2.9-3.3g/cm3 |
| Solubility in H2O | N/A |
| Exact Mass | 40.9846 |
Aluminum Nitride AlN powder CAS 24304-00-5
Applications of Aluminum Nitride AlN Powder
1. Piezoelectric device application
Aluminum nitride has high resistivity, high thermal conductivity (8-10 times of Al2O3), and low expansion coefficient similar to silicon, making it an ideal material for high temperature and high-power electronic devices.
2. Electronic packaging substrate material
Commonly used ceramic substrate materials are beryllium oxide, alumina, aluminum nitride, etc., among which alumina ceramic substrate thermal conductivity is low, thermal expansion coefficient and silicon do not match. Although beryllium oxide has excellent properties, its powder is highly toxic.
In the existing ceramic materials that can be used as substrate materials, silicon nitride ceramic has the highest bending strength, good wear resistance, the best comprehensive mechanical properties of ceramic materials, and its thermal expansion coefficient is the smallest. And aluminum nitride ceramics have high thermal conductivity, good thermal impact resistance, and still have good mechanical properties at high temperatures. It can be said that aluminum nitride and silicon nitride are the most suitable materials for electronic packaging substrates from the point of view of performance, but they also have a common problem is that the price is too high.
3. Applied to luminous materials
Aluminum nitride has a maximum direct bandgap width of 6.2eV, which has a higher photoelectric conversion efficiency than indirect bandgap semiconductors. As an important blue and ultraviolet luminescent material, AlN is used for ultraviolet or deep-ultraviolet light-emitting diodes, ultraviolet laser diodes, and ultraviolet detectors. In addition, AlN can form continuous solid solutions with group III nitride compounds such as GaN and InN, and its three or four-element alloys can achieve a continuously tunable bandgap from visible band to deep ultraviolet band, making it an important high-performance luminescent material.
4. Applied to the substrate materials
AlN crystals are ideal substrates for GaN, AlGaN, and AlN epitaxial materials. Compared with sapphire or SiC substrates, AlN has higher thermal matching and chemical compatibility with GaN and lower stress between the substrate and the epitaxial layer. Therefore, AlN crystal as GaN epitaxial substrate can greatly reduce the defect density in the device, improve the performance of the device, and has a good application prospect in the preparation of high temperature, high frequency, high power electronic devices.
In addition, the substrate of AlGaN epitaxial material with AlN crystal as a high Al component can effectively reduce the defect density in the nitride epitaxial layer, and greatly improve the performance and service life of nitride semiconductor devices. High quality daily blind detector based on AlGaN has been successfully applied.
5. Used for ceramics and refractory materials
Aluminum nitride can be used in the sintering of structural ceramics. The prepared aluminum nitride ceramics have good mechanical properties, higher flexural strength than Al2O3 and BeO ceramics, and high-temperature resistance and corrosion resistance. AlN ceramics can be used to make crucible, Al evaporating dish, and other high-temperature corrosion-resistant parts. In addition, pure AlN ceramics are colorless transparent crystals with excellent optical properties, which can be used as heat-resistant coatings for high-temperature infrared windows and fairings of transparent ceramics manufacturing electronic optical devices.
6. Composite materials
As a packaging material, epoxy resin/AlN composite materials need good thermal conductivity and heat dissipation, and this requirement is becoming more and more stringent. Epoxy resin as a kind of polymer material with good chemical properties and mechanical stability, it is easy to cure, has low shrinkage, and has low thermal conductivity. By adding AlN nanoparticles with excellent thermal conductivity into epoxy resin, the thermal conductivity and strength of the material can be effectively improved.
Main Supplier of Aluminum Nitride AlN Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality Aluminum Nitride AlN Powder, please feel free to contact us and send an inquiry. (brad@ihpa.net)
According to the bank of Spain’s latest forecast data, the average inflation is expected to hit 7.6% in 2022, but the average wage increase for workers in this country is expected to be less than 4% in 2022.
If the Bank of Spain’s forecast comes true, the gap between price and wage growth in Spain in a single year will be the largest since 1984.
Prices in Spain rose 9.8% year on year in March 2022 and average wages rose 2.4% year on year, with the Bank of Spain forecasting that the country’s inflation rate will improve from July.
Recent changes in the international situation have had a big impact on commodity and energy prices. How the prices of the AlN powder will develop in the future is still uncertain.
